Fire Sprinklers | Fire Extinguishers
Kitchen Systems | Fire Alarms & More
Three Generation Family Business - Since 1971
Proudly Serving
Palm Springs & Surrounding areas for Over 50 Years
- Fire Sprinklers
- Fire Extinguishers
- Kitchen Systems
- Fire Alarms & More
Three Generation Family Business Since 1971
Frequently Asked Questions
Smoke alarms should be tested at least once a month by pressing the test button. Replace the batteries at least once a year or when the alarm chirps to indicate low battery. Replace the entire unit every 10 years.
A multi-purpose (Class ABC) fire extinguisher is recommended for homes. It can be used on fires involving ordinary combustibles (Class A), flammable liquids (Class B), and electrical equipment (Class C).
PASS stands for Pull the pin, Aim the nozzle at the base of the fire, Squeeze the handle, and Sweep the nozzle side to side at the base of the fire until it’s out.
A fire escape plan shows all the exits and escape routes in a home. It should be practiced with all members of the household at least twice a year.
No, elevators should never be used during a fire. Use the stairs instead. Elevators may stop working or take you to a floor where the fire is active.
Call 911, seal the room by closing the door and covering cracks with towels or clothes to keep smoke out, and signal for help from a window using a flashlight or cloth.
No, water should not be used on grease fires, electrical fires, or fires involving flammable liquids, as it can spread the fire or cause electrocution.
Yes, most states have laws requiring smoke alarms in every bedroom, outside each sleeping area, and on every level of the home. Requirements can vary by state and municipality.
If you need this tailored for a business or specific type of building, just let me know and I’ll adjust the content accordingly.
Most smoke detector and fire alarm models will include a “silence” function. Manually pressing and holding the “silence” button on the smoke detector/fire alarm will cause it to stop sounding but not permanently turn it off.
On older models, you may need to unscrew the alarm from the wall or ceiling and hold down a button on the back.
If the smoke detector/fire alarm continues to pick up on smoke after a short period of time has elapsed, the beeping noise will start again to ensure your safety.
If your fire alarm or smoke detector is continually beeping, this is an indicator that you need to replace the batteries. If it continues to beep after installing new batteries, this means that the smoke detector/fire alarm has become faulty, and you should immediately get a replacement.
It’s ok to remove the batteries to stop the noise in the meantime, but it’s vitally important that you replace either the batteries or the fire alarm/smoke detector as soon as possible.
If you have a hard-wired fire alarm in your building it is most likely a Commercial fire alarm system.
If you are experiencing any problems with commercial fire alarms, it is highly recommended that you call a certified fire protection company immediately. Please don’t try to solve this problem by yourself.
Turning off a hard-wired fire alarm can be much more complicated than a battery-powered smoke detector. Some fire alarms have “silence” or “reset” buttons, but if they are not functioning, then you will have to remove the device.
There are wires involved, which means you will need to shut the main power source off before proceeding with anything. That’s the first indicator that you should contact professionals.
If you are located in Palm Springs or San Diego call Desert Fire or take a look at our services for all of your fire prevention and safety needs.
If you need this tailored for a business or specific type of building, just let me know and I’ll adjust the content accordingly.
Smoke alarms should be tested at least once a month by pressing the test button. Replace the batteries at least once a year or when the alarm chirps to indicate low battery. Replace the entire unit every 10 years.
A multi-purpose (Class ABC) fire extinguisher is recommended for homes. It can be used on fires involving ordinary combustibles (Class A), flammable liquids (Class B), and electrical equipment (Class C).
PASS stands for Pull the pin, Aim the nozzle at the base of the fire, Squeeze the handle, and Sweep the nozzle side to side at the base of the fire until it’s out.
A fire escape plan shows all the exits and escape routes in a home. It should be practiced with all members of the household at least twice a year.
No, elevators should never be used during a fire. Use the stairs instead. Elevators may stop working or take you to a floor where the fire is active.
Call 911, seal the room by closing the door and covering cracks with towels or clothes to keep smoke out, and signal for help from a window using a flashlight or cloth.
No, water should not be used on grease fires, electrical fires, or fires involving flammable liquids, as it can spread the fire or cause electrocution.
Yes, most states have laws requiring smoke alarms in every bedroom, outside each sleeping area, and on every level of the home. Requirements can vary by state and municipality.
If you need this tailored for a business or specific type of building, just let me know and I’ll adjust the content accordingly.
Most smoke detector and fire alarm models will include a “silence” function. Manually pressing and holding the “silence” button on the smoke detector/fire alarm will cause it to stop sounding but not permanently turn it off.
On older models, you may need to unscrew the alarm from the wall or ceiling and hold down a button on the back.
If the smoke detector/fire alarm continues to pick up on smoke after a short period of time has elapsed, the beeping noise will start again to ensure your safety.
If your fire alarm or smoke detector is continually beeping, this is an indicator that you need to replace the batteries. If it continues to beep after installing new batteries, this means that the smoke detector/fire alarm has become faulty, and you should immediately get a replacement.
It’s ok to remove the batteries to stop the noise in the meantime, but it’s vitally important that you replace either the batteries or the fire alarm/smoke detector as soon as possible.
If you have a hard-wired fire alarm in your building it is most likely a Commercial fire alarm system.
If you are experiencing any problems with commercial fire alarms, it is highly recommended that you call a certified fire protection company immediately. Please don’t try to solve this problem by yourself.
Turning off a hard-wired fire alarm can be much more complicated than a battery-powered smoke detector. Some fire alarms have “silence” or “reset” buttons, but if they are not functioning, then you will have to remove the device.
There are wires involved, which means you will need to shut the main power source off before proceeding with anything. That’s the first indicator that you should contact professionals.
If you are located in Palm Springs or San Diego call Desert Fire or take a look at our services for all of your fire prevention and safety needs.
If you need this tailored for a business or specific type of building, just let me know and I’ll adjust the content accordingly.
Locally Owned and Operated since 1971
At Desert Fire Co, we’ve been providing the highest quality fire protection services & products to Palm Springs, The Coachella Valley, San Diego, and Joshua Tree since 1971. Not only are we a three generation family-owned business, but our dozens of 5 star reviews speak for themselves.
Our goal is simple: to provide fast, professional fire protection services at competitive prices. We proudly service Fire Extinguishers, Fire Sprinkler Systems, Fire Alarms, Fire Alarm Monitoring, Fire Suppression Kitchen Systems and much more. No fire protection job is too large or too small for Desert Fire.
We are available 24/7 for any fire protection emergency needs. We also provide free quotes over the phone or if you send us a message on our website we will call you back.
